Announcement

Collapse
No announcement yet.

3 mods = 30whp and 22ft/lbs @ 7200 rpms

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 240sxTTC
    replied
    What size is the VQ TB? I'm using the 90mm Q45 TB but it's not a 6-pin.

    Leave a comment:


  • Big J
    replied
    Time to find a 6 pin LS2 throttle body...... hell, even a TB off a 3.9 V6 is bigger than a VQ TB

    Leave a comment:


  • Umai Kakudo
    replied
    Check out SG Motorsports work with testing intake manifolds on the VQ.

    http://www.sg-motorsport.com/development.html

    http://www.youtube.com/watch?v=XUHKYqo2Rjw

    If you need additional top end you might be able to go for even more flow on the intake manifold for more HP's.

    Leave a comment:


  • Rustspecs13
    replied
    Looks good!

    I know Aaron from a few years ago when I had a 90 maxima, he definitely knows his nissan V6's!

    ~Alex

    Leave a comment:


  • Big J
    replied
    I bumped the limiter up to 7300 before the day was over.

    It stays wound out pretty much all the time so I don't want to go too high.

    Leave a comment:


  • Def
    replied
    Not bad. Looks like it might like a few hundred more RPM up top.

    Leave a comment:


  • Big J
    started a topic 3 mods = 30whp and 22ft/lbs @ 7200 rpms

    3 mods = 30whp and 22ft/lbs @ 7200 rpms

    Best 3 mods ever, NWP Engineering gutted VQ35 intake manifold, OBX equal length header and y-pipe, and a 3" exhaust I fabbed up.




    sounds great

    YouTube Video
    ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
Working...
X