No announcement yet.

Tilton clutch cylinder sizing

  • Filter
  • Time
  • Show
Clear All
new posts

  • Tilton clutch cylinder sizing

    I have a set of 600 series floor mounted pedals and need some help sizing up the clutch master cylinder, which will be connected to a Z32 trans with a twin disc clutch?
    I was thinking one size larger over the stock size 300zx of 5/8"s.
    So 7/10"s am i over complicating this issue???

  • #2
    I use a 5/8" on mine with a 6.5:1 pedal ratio, and it disengages about 1.5" off the floor. if the pedal ratio is any lower, then I'd go up to a 3/4" and be prepared to add a pedal stop on the floor.
    Originally posted by SoSideways
    I don't care what color they are as long as they are LONG AND HARD.
    '04 G35 Sedan 6MT- The DD
    '96 240SX- The Track Toy