about to buy some shocks and springs

[KA240SX808]

Fronts you can play with. Rears, I would think 1/2-2/3 turn from full soft should be enough for those springs. I had 1/4 on my 14 when it had 3k rear springs. (3k = ~168lbs)

[Serebros]

any suggestions on settings for my yellows with my springs

[Sleepy_Steve]

That's what she said?

Honestly, my front springs are kinda heavy, and I'm not sure I need a bigger front bar until I make the switch from summer tires to R-comps.

[hai1206vn]

"I don't care as long as the bar is big and hard."

[WorkInProgressK]

Yes, I don't think you can go too big up front.

Hahahaha! When removing your sway bar is weight reduction. That's when your bar is too big.

[Serebros]

springs and shocks purchased =)

thanks for all the info over the years guys!

[Def]

plus a fat front sway bar

Yes, I don't think you can go too big up front.

[hai1206vn]

plus a fat front sway bar

[Serebros]

I am about to buy some shocks/springs for my s13 today, any last suggestions on springs or setup?

Koni Yellows (Front and rear)
RSR Race Springs (280lb front, 252lb rear)

This is be my first major suspension upgrade, im really excited, just wanted to see any opinions before I jump the gun, also do i need to buy aftermarket bumpstops?

Currently my car is

1993 Coupe
Circuit Sports Tension Rods
Jonnie Fraz Tension Brace

thats about it

Thanks